Linqing Rongwei Bearing Manufacturing Co., LTD

    Introduction to models and applications of radial joint bearings

(1) GE... E-type single outer ring, without lubricating oil groove. Capable of withstanding radial loads and smaller axial loads in any direction.

  (2) GE... ES type single seam outer ring with lubricating oil groove. The analysis of the usage method of variable speed bearings can withstand radial loads and smaller axial loads in any direction.

  (3) GE... ES-2RS type single seam outer ring, with lubricating oil groove and sealing rings on both sides. Capable of withstanding radial loads and smaller axial loads in any direction.

  (4) GEEW... ES-2RS type single seam outer ring, with lubricating oil groove and sealing rings on both sides. Capable of withstanding radial loads and smaller axial loads in any direction.

  (5) GE... ESN type single seam outer ring with lubricating oil groove,Spherical Plain BearingThe outer ring has a stop groove. The quality judgment error of TIMKEN bearings is that they can withstand radial loads and small axial loads in any direction. But when the axial load is borne by the stop ring, its ability to bear axial load decreases.

  (6) GE... XSN type double seam outer ring (split outer ring), with lubricating oil groove and stop groove on the outer ring. Capable of withstanding radial loads and smaller axial loads in any direction. But when the axial load is borne by the stop ring, its ability to bear axial load decreases.

  (7) The GE... HS type inner ring has a lubricating oil groove and a double half outer ring, and the clearance can be adjusted after wear. Capable of withstanding radial loads and smaller axial loads in any direction.

  (8) The inner ring of GE... DE1 type is made of quenched bearing steel, and the outer ring is made of bearing steel. During the assembly of the inner ring, it is extruded and has lubricating oil grooves and oil holes. Bearings with an inner diameter less than 15mm, without lubricating oil grooves or oil holes. Capable of withstanding radial loads and smaller axial loads in any direction.

  (9) The inner ring of GE... DEM1 type is made of quenched bearing steel, and the outer ring is made of bearing steel. Squeeze molding during inner ring assembly,Spherical Plain BearingAfter being installed in the bearing seat, the TIMKEN bearing ring is processed with ultra precision grinding to press out end grooves on the outer ring to fix the bearing axially. Capable of withstanding radial loads and smaller axial loads in any direction.

  (10) The GE... DS model has assembly grooves and lubrication grooves on the outer ring. Limited to large-sized bearings. Can withstand radial loads and smaller axial loads in any direction (one side of the assembly groove cannot withstand axial loads)

Contact: Manager Wu;  
Contact phone number: 13563502328;
Factory    Electricity: 0635-2818908;
Spread    True: 0635-2818906 
Net    Address: www.guan-Jie.com;
Ground    Address: Next to Provincial Highway 315, Tangyuan Town Economic Development Zone, Linqing City, Shandong Province